About Us       Contact Us

 

 

 

 

 

 

 

 

Heat Pipe

 

 

e.Green Heater

e.Green Fan Heater

Heat Pipe

■ EcoLife® (EL)
  
 Revolution  of Agriculture, Fisheries & Livestock

EcoMineral 71®
   
All toxin-free Agricultural Crops

KorSun CMC (RYO/MYO)
   수제담배 / 전자동 담배 제조기 Fuma CMC

 

The Heat Pipe (Patent No. 0387377)

 

 

Basic Principles of our Heat Pipe

Operation Principles of our Heat Pipe

The recently invented our Heat Pipe is our unique product of high thermal conductive extruded aluminum double-decked  pipe sealed completely after simultaneous process of high vacuum work and heat medium infusion into the extruded structure.

This product consists of an Evaporation Part and a Condensation Part, etc.

By heating the Evaporation Part, the heat medium is evaporated, this evaporated heat medium is condensed at the Condensation Part and then turns to liquid(generation of heat occured). Repetition of this process[evaporated heat medium-condensation(becoming liquid)-evaporated heat medium] emits heat.  

 

 

The Thermal Conduction Speed of our product is 1,500 times faster than other products.

The speed of our product's thermal conduction is 1,500 times faster than other conventional copper pipes. Even though hot water or steam should be circulated all the way through pipes in other products, our product needs to be heated only one end of the pipe(Evaporation Part).

Our product's thermal conduction speed is 3m/sec. and thermal conductivity is 98.5 %.

 

Comperative Table of Heat Resistivity

Super Energy-Saving coming from 3,000 times bigger quantity of thermal conduction.

Item

Unit

Heat Pipe

other products

Heat Resistivity

℃/W

0.008

26

The Quantity of Heat = Temperature Difference/Heat Resistivity

The heat resistivity shows the capability of our Heat Pipe.
Our Heat Pipe's thermal conductivity is 3,000 times higher than other products under same temperature difference, which means huge energy-saving.

 

Steam(Hot Water) Circulation Comparison between our Heat Pipe Radiator and other radiators

Illustration
(Circulation Comparison between
our Heat Pipe Boiler and other boilers)

Advantages of our Heat Pipe(extruded aluminum double-deck structure) Radiator

    - The amount of water(steam) is a lot less than others.  

    - The capacity of boiler is less than others, which is very economical.

    - The heat efficiency is higher than others.  

    - The span of life is semi-permanant.  

    - Easy installation

    - More than 40 % energy-saving.

 

Economic Review of our Heat Pipe Installation

the Result of Basic Test of Energy-Saving

Items

Other Products

Heat Pipe

Savings

Saving Rates

Remarks

Time taken toreach 40℃

95min

60min

35min

36.8%

 

Fuel Consumption

1218ℓ

756ℓ

462ℓ

37.9%

 

Time of Heat Retaining

20min

41min

21min

105%

 

Consumption of Electricity

167.5W

52.88W

114.6W

68.4%

Boiler

Remarks

1. The capacity of boiler for test : 15,000kcal/h

2. The test result of 2 same sizes of water tanks with our Heat Pipe and other product, respectively.

3. The results of checking times taken to reach 40°C, afterwards, the boilers were switched off and then checked times for Temperature Retaining.

 

Usage

    - Sauna

    - Home Heating

    - Green House Heating  

    - Dryers/Warmers

    - Cooling Systems

 

Return to Top

 

 

 

 

 

© Copyright 2005-2006 KorSun International, Inc.,  All Rights Reserved. trade@korsun.co.kr
Your use of the information in this site is subject to the terms of our
Legal Statement. Please see our Privacy Policy.